KERN DAB 200-2 Operating Manual
                                                 | |
Contents
|
DAB-BA-e-1813 197.5 Mains connectionPower supply is provided via the supplied mains cable.Check, whether the voltage acceptance on the device is set correctly.Do not connect the appliance to the power grid unless the informationon the instrument (sticker) matches the local mains voltage.Do not eliminate the protective effect by using an extension leadwithout earth terminal. For power supplies from power grids withoutearth terminals call a specialist to establish equivalent protectionaccording to the relevant installation regulations. The mains plug must be accessible at any time. Prior to commissioning check the mains cable for damage. Place the cable in a way that it cannot be damaged or handicapsthe measuring process.Important:Does the rating match the standard local mains current? Do not connect if mains voltages are different! If matching, connect the moisture analyser.7.6 Switching on and offTurn on appliance by pressing the ON/OFF key.The display lights up and the equipment conducts a self-test. Waituntil basic configuration appears.To switch off press the ON/OFF button, the display disappears. |
Related manuals for KERN DAB 100-3
manualsdatabase
Your AI-powered manual search engine