DAB-BA-e-1813 177.3 PlacingThe moisture analyser is supplied part-assembled. Control whether the delivery iscomplete immediately after unpacking the individual parts and assemble the separatecomponent parts according to the sequences.1. Put heat shield into the sample chamber.2. Place windshield in a way that the pin in the heat shield is aligned to the holein the heat shield.3. Place removal aid into the windshield. Ensure that the lug lies exactly in thegroove of the windshield.4. Attach the sample dish holder carefully and rotate it until it locks.5. Put the sample dish on the removal aid.12453
