Kenwood DNX7210BT Instruction Manual

Also see for DNX4210BT: Quick start guide Quick start guide

Contents

4444 45Return to the Top pageRadio, TVReturn to the Top pageRadio, TVRadio Basic OperationMost functions can be controlled from the source control screen.NOTE• Set the remote controller mode switch to AUD mode before starting operation, see Switching the operationmode (P.93).213 34 45 8627Simple Control screen List Control screen1 PS/Station name displayDisplays the PS name.2 Information display/Control switching areaDisplays the following information.• [FM1] etc.: Band display• MHz/kHz: Frequency display• Preset #: Preset numberTouch to switch between the Simple Control and List Control screen.3 Multi function keyTouch to switch the multi function menu. For details on the menu, see Multi function menu (P.45).4 Preset key/Multi function menuRecalls the memorized station or channel. When touched for 2 seconds, stores the current receivingstation or channel in memory.When switched, various functions can be performed by using keys in this area.For details on the menu, see Multi function menu (P.45).5 Sub function keyTouch to display “Sub function menu” (7 in this table).6 Preset listDisplays the list of preset stations or channels and the information.Radio and TV Operation 7 Sub function menuThe following functions can be performed by using keys in this area.• Switches the band: Touch [AM] or [FM].• Tunes in a station: Touch [1] [¡]. The method of frequency switching can be changed. See Multifunction menu (P.45).The bar in center (tuner only) shows the current frequency location.8 List switching keyTouch to switch between the preset list and the information list.In tuner mode, radio text plus will be displayed.Multi function menuThe functions of each key are as follows.[P1] - [P6]Selects the preset station. Touch for 2 seconds to store the current station into the preset memory.[ ]Displays the list of preset stations or channels.[TI] (FM Tuner only)Sets the traffic information mode on. For details, see Traffic Information (P.51).[SEEK]Switches the seek mode in the following sequence; [AUTO1], [AUTO2], [MANUAL].• AUTO1: Tunes in a station with good reception automatically.• AUTO2: Tunes in stations in memory one after another.• MANUAL: Switches to the next frequency manually.[AME]Selects the auto memory mode. For details, see Auto memory (P.49).[PTY] (FM Tuner only)Searches a program by setting program type. For details, see Search by program type (P.50).[MONO] (FM Tuner only)Select the Monaural reception.[LO.S] (FM Tuner only)Turns the Local Seek function on or off.[ SETUP]Touch to display the SETUP Menu screen. See Setting Up (P.68).[ AUDIO]Touch to display the Audio Control screen. See Controlling Audio (P.82).[ EXT SW]Touch to control the external device power supply. For details, see External Device Control (P.80).[ REAR ]Touch to mute the rear speaker.