Kenwood DNX7210BT Instruction Manual

Also see for DNX4210BT: Quick start guide Quick start guide

Contents

8484 85Return to the Top pageAudio Setting UpReturn to the Top pageAudio Setting UpCar type setupYou can setup the car type and speakernetwork, etc.1 Touch [Car Type] in the Audio SETUPscreen.Car Type screen appears.2 Select your car type from the list.NOTE• If your car type is selected, the Delay TimeAlignment is set automatically (for timingadjustment of sound output for each channel) tohave the highest surround effects.Speaker location setup1 In the Car Type screen, touch[Location].Speaker Location screen appears.2 Select the speaker locations using[3].Front SpeakerSelect the location from “Door”/ “On Dash”/“Under Dash”.Rear SpeakerSelect the location from “Door”/ “Rear Deck”,“2nd Row”/ “3rd Row” (Minivan, Minivan(Long)).DSP selectYou can select whether using DSP (DigitalSignal Processor) System.1 Touch [Bypass] or [Through] of [DSPSelect] in the Audio SETUP screen.BypassThere is no effect by DSP.ThroughThere is an effect by DSP.NOTE• When the mode is set to [Bypass], DSP Systemcannot be adjusted.ElevationYou can raise the sound position heard fromthe speakers virtually.1 Touch [Elevation] in the Audio SETUPscreen.Elevation screen appears.2 Select Elevation level from [High],[Low], and [OFF].