Kenwood DNX7210BT Instruction Manual

Also see for DNX4210BT: Quick start guide Quick start guide

Contents

7070 71Return to the Top pageSetting UpReturn to the Top pageSetting UpUser interfaceYou can setup user interface parameters.1 Touch [User Interface] in the list.User Interface screen appears.2 Set each item as follows.BeepTurns the key touch tone on or off.Default is “ON”.Remote Sensor*Selects a remote control signal. Default is “ON”.LanguageSelect the language used for the controlscreen and setting items. See Language setup(P.71).Text ScrollAllows scrolling of text display on the sourcecontrol screen. Select from “Auto”/”Once”/”OFF”.Auto (Default): Scrolls the text automatically.Once: Allows you to scroll the text only onceautomatically when updated.OFF: Does not scroll the text automatically.* When turned off “Remote Sensor”, theremote control of TV reception is rejected.Drawer CloseSets whether to close the common menu (P.18)automatically. Default is “Auto”.AnimationSets whether to display animation. Default is “ON”.SecondarySets whether to display the navigationinformation in the audio screen or vice versa.Default is “ON”.Vehicle InformationDisplays the vehicle information.This function requires a commercial adaptor.Consult your Kenwood dealer for details.Language setup1 Touch [SET] of [Language] in the UserInterface screen.Language Setting screen appears.2 Set each item as follows.Select ModeSelects the mode to select a language.Easy (Default): Selects a language easily.Advanced: Allows you to select languages forrespective items.*Language SelectSelects a language.* If you select [Advanced] for Select Mode,the following screen appears.GUI Language Select:Selects the display language used for thecontrol screen and so forth.Navigation Language Select:Selects the language used for navigation.Text Language Select:Selects the language used for tag text (songinformation).3 Touch [Enter].NOTE• To cancel the language setup, touch [Cancel].Touch panel adjustment1 Touch [Touch] in the System Menuscreen.Touch Panel Adjustment screen appears.2 Follow the instruction on the screenand touch the center of each .NOTE• To cancel the touch panel adjustment, touch[Cancel].• To reset to the initial status, touch [Reset].