Kenwood DNX7210BT Instruction Manual

Also see for DNX4210BT: Quick start guide Quick start guide

Contents

9090 91Return to the Top pageAudio Setting UpReturn to the Top pageAudio Setting UpNOTE• Make fine adjustment of the delay time of thespeaker output specified here to have a moresuitable environment for your vehicle.• If you specify the distance from the center of thecurrently set listening position to every speaker,the delay time will be automatically computedand set.1 Determine the center of the currently setlistening position as the reference point.2 Measure the distances from the referencepoint to the speakers.3 Calculate the differences between the distanceof the furthest speaker and other speakers.4 Input the differences calculated in step 3 forindividual speakers.5 Adjust gain for individual speakers. A soundimage will be shifted to the speaker withincreased gain.Example: When [Front All] is selected as thelistening position50cm80cm150cm +70cm+0cm+100cmListening PositionYou can adjust the sound effects accordingto your listening position.1 Touch [Position].Position screen appears.2 Select listening position from[Front R] (Right front), [Front L] (Leftfront), [Front All] (All front), and [All]using [2] and [3].Position DTA ControlYou can fine-adjust your listening position.1 In Position screen, touch [Adjust].2 Select the speaker you wish to adjustby touching speaker icon.3 Set DTA as follows.[2], [3]Adjust the settings of the DTA position.GainTouch to adjust the gain of each speaker.