Kenwood DNX7210BT Instruction Manual

Also see for DNX4210BT: Quick start guide Quick start guide

Contents

6262 63Return to the Top pageBluetooth OperationReturn to the Top pageBluetooth OperationRegistering Bluetooth unit PINcodeYou can set the PIN code to the Bluetoothunit. The code is acquired when registering(pairing) from the cell-phone or audio playerside.1 Touch [SET] of [Receiver PIN Code] inthe Bluetooth SETUP screen.Receiver PIN Code Set screen appears.2 Enter a code number and touch[Enter].NOTE• If you want to cancel the registration, touch[Cancel].• If you want to clear the entered number, touch[Clear].Bluetooth output setupYou can select speakers to output the soundfrom cell-phone (such as phone call voiceand ringing tone) and Bluetooth audioplayer.1 Touch [Front Only] or [All] of[Bluetooth HF/Audio] in the BluetoothSETUP screen.Front OnlyOutputs from the front speakers.AllOutputs from all speakers.Hands-Free ControlYou can perform various setup about hands-free function.1 Press the button.Hands Free screen appears.2 Touch desired key in the Hands Freescreen.See the following section for each setting.• Set up the Hands-Free system (P.63)• Set up SMS (P.64)• Preset the phone number (P.66)Setting up the Hands-Freephone1 Touch [TEL SETUP] in the Hands Freescreen.Hands Free SETUP screen appears.2 Set each item as follows.Auto Response*1Sets an automatic response time to pick-up anincoming call.OFF (Default): Automatic response is notavailable.0-99: Set calling ring time (second).Call BeepSelect whether to beep at an incoming call.ON (Default): Beeps.OFF: Not beeps.SMS Receive BeepSelect whether to beep at an incoming SMS.ON (Default): Beeps.OFF: Not beeps.Phone Information UseSets whether to download phonebook foroutgoing, incoming and missed calls list.ON (Default): Yes.OFF: No.SMS UseSelect whether to use SMS.ON (Default): Uses SMS.OFF: Not uses SMS.Sort OrderSets how to arrange the cell-phonephonebook.First: Arranges in the order of first name.Last (Default): Arranges in the order of lastname.Echo Cancel LevelAdjusts the level of echo cancellation.Default is “0”.Microphone LevelAdjusts the sensitivity of the telephonemicrophone. Default is “20”.Noise Reduction LevelReduces the noises generated by surroundingenvironment without changing themicrophone volume. Use this setting when thevoice of caller is not clear. Default is “0”.[Restore]Resets the settings to the default settings.*1 Either the time interval for automaticanswer set on this unit or the time intervalset on the cell-phone, whichever is shortertakes effect.