Kenwood DNX7210BT Instruction Manual

Also see for DNX4210BT: Quick start guide Quick start guide

Contents

108108 109Return to the Top pageAppendixReturn to the Top pageAppendix■ Bluetooth sectionTechnologyDNX7210BT: Bluetooth Ver.3.0 CertifiedDNX5210BT, DNX5510BT, DNX4210BT: Bluetooth 2.0 CertifiedFrequency: 2.402 – 2.480 GHzOutput Power: +4dBm (MAX), 0dBm (AVE), Power Class2Maximum Communication Range: Line of sight approx. 10m (32.8 ft)ProfileDNX7210BT• HFP (Hands Free Profile)• SPP (Serial Port Profile)• HSP (Headset Profile)• A2DP (Advanced Audio Distribution Profile)• AVRCP (Audio/Video Remote Control Profile)• OPP (Object Push Profile)• PBAP (Phonebook Access Profile)• Multi Profile supportDNX5210BT, DNX5510BT, DNX4210BT• HFP (Hands Free Profile)■ DSP section (DNX7210BT)Graphics equalizerBand: 7 BandFrequency (BAND1 – 7): 62.5/160/400/1k/2.5k/6.3k/16k HzGain: -9/-8/-7/-6/-5/-4/-3/-2/-1/0/1/2/3/4/5/6/7/8/9 dBX’overHigh pass filterFrequency: Through, 30/ 40/ 50/ 60/ 70/ 80/ 90/ 100/120/ 150 / 180/ 220/ 250 HzSlope: -6/-12/-18/-24 dB/Oct.Low pass filterFrequency: 30/ 40/ 50/ 60/ 70/ 80/ 90/ 100/ 120/150/ 180/ 220/ 250 Hz, ThroughSlope: -6/-12/-18/-24 dB/Oct.PositionFront / Rear /Subwoofer Delay: 0 – 6.1 m (0.02 m Step)Gain: -8 – 0 dBSubwoofer level: -50 – +10 dB■ FM tuner sectionFrequency Range (50 kHz): 87.5 MHz – 108.0 MHzUsable Sensitivity (S/N : 26 dB)DNX7210BT: 0.9 μV/75 ΩDNX5210BT, DNX5510BT, DNX4210BT: 0.7 μV/75 ΩQuieting Sensitivity (S/N : 46 dB)DNX7210BT: 2.0 μV/75 ΩDNX5210BT, DNX5510BT, DNX4210BT: 1.6 μV/75 ΩFrequency Response (± 3.0 dB): 30 Hz – 15 kHzS/N Ratio (dB): 65 dB (MONO)Selectivity (± 400 kHz): ≥ 80 dBStereo Separation: 35 dB (1 kHz)■ AM tuner sectionFrequency Range (9 kHz)LW : 153 – 279 kHzMW : 531 – 1611 kHzUsable SensitivityMW : 25μVLW : 45μV■ Video sectionColor System of External Video Input: NTSC/PALExternal Video Input Level (RCA/mini jack): 1 Vp-p/ 75 ΩExternal Audio Max Input Level (RCA/mini jack): 2 V/ 25 kΩVideo Output Level (RCA jacks): 1 Vp-p/ 75 ΩAudio Output Level (RCA jacks): 1.2 V/ 10 kΩ■ Audio sectionMaximum Power (Front & Rear): 50 W x 4Full Bandwidth Power (Front & Rear) (PWR DIN45324,+B=14.4V): 30 W x 4Preout Level (V)DNX7210BT: 4 V/ 10 kΩDNX5210BT, DNX5510BT, DNX4210BT: 2 V/ 10 kΩPreout Impedance: ≤ 600 ΩSpeaker Impedance: 4 – 8 ΩTone (DNX5210BT, DNX5510BT, DNX4210BT)Bass: 100Hz ± 10dBMiddle: 1kHz ± 10dBTreble: 10kHz ± 10dB■ External SW (DNX7210BT)Maximum Power Supply Current: 500 mA■ Navigation sectionReceiver: High-sensitivity GPS receiverReception Frequency: 1575.42 MHz (C/A code)Acquisition TimesCold : 35 seconds (typ)(On average for a stationary receiver with a clearview of the sky)Reception Frequency: 1575.42 MHz (C/A code)Update Rate: 1/second, continuousVelocity : 0.05 m/sec. RMSAccuracyPosition: <6 meters, typicalVelocity: 0.1 meter/sec RMSPosition Method: GPSAntenna: External GPS antenna■ GeneralOperating Voltage: 14.4 V (10.5 – 16 V allowable)Maximum Current Consumption: 15 AInstallation Dimensions (W x H x D)DNX7210BT: 182 x 112 x 163 mmDNX5210BT, DNX5510BT, DNX4210BT: 182 x 112 x 160 mmOperational Temperature Range: -10 °C – +60 °CWeightDNX7210BT: 2.6 kgDNX5210BT, DNX5510BT: 2.2 kgDNX4210BT: 2.0 kgNOTE• Although the effective pixels for the liquid crystalpanel is given as 99.99% or more, 0.01% of pixelsmay not light or may light incorrectly.Specifications subject to change without notice.

/ 58

Related manuals for Kenwood DNX4210BT