Kenwood DNX7210BT Instruction Manual

Also see for DNX4210BT: Quick start guide Quick start guide

Contents

6060 61Return to the Top pageBluetooth OperationReturn to the Top pageBluetooth OperationReceiving a call1 Touch [ ] to answer a phone call or[ ] to reject an incoming call.NOTE• While monitoring the camera view, this screendoes not appear even if a call comes in. To displaythis screen, press the button or return theshift knob of car to the driver position.Operations during a callAdjust the receiver volumePress the <∞> or <5> button.Turn the volume knob.Switch the voice outputTouch [ ] to switch the voice outputbetween phone and speaker.Output the dial toneTouch [DTMF] to display the tone input screen.You can send tones by touching desired keyson the screen.Call waitingIf you receive a call during another call, youcan answer it with the current call suspendedor switch between the current call andwaiting call.Answer the new incoming callTouch [ ]. The current call is kept suspended.Switch between the current and waiting callTouch [ ] again.Each time you touch [ ], the calling party isswitched.Terminate the current callTouch [ ].The call switches to the waiting one.Bluetooth SetupYou can register PIN code, select the deviceto connect, and perform output setup.1 Press the button.Hands Free screen appears.Touch [BT SETUP].Bluetooth SETUP screen appears.See the following section for each setting.• Register the PIN code (P.62)• Select the unit to connect (P.56)• Set up output (P.62)