Kenwood DNX7210BT Instruction Manual

Also see for DNX4210BT: Quick start guide Quick start guide

Contents

7474 75Return to the Top pageSetting UpReturn to the Top pageSetting Up3 Follow the instruction on the screen.RecallRecalls the memorized settings.MemoryMemorizes the current settings.ClearClears the currently memorized settings.CancelQuits memorization/recalling of settings.Display Setup1 Touch [Menu] on any screen.2 Touch [SETUP].SETUP Menu screen appears.3 Touch [Display].Display Menu screen appears.See the following section for each setting.• Control monitor angle (P.74)• Adjust panel color (P.75)• Changing background image (P.76)Monitor angle controlYou can adjust the position of the monitor.1 Touch [Angle] in the Display Menuscreen.Angle setup screen appears.2 Select a below number thatrepresents your desired angle setting.Default is “0”.NOTE• You can store the current monitor angle as theangle during power off. Touch [Memory] whenthe desired angle is selected.However, the setting value returns to “0” if youdetach the front panel.• The front panel can be set to open automaticallywhen the ignition is turned off, so that it can bedetached for antitheft purpose. Touch [ON] of[Auto Open].Panel color coordinateYou can set the screen and buttonillumination color.The selectable items differ depending on theunit.1 Touch [Color] in the Display Menuscreen.Color screen appears.2 Touch [SET] of[Panel Color Coordinate].Panel Color Coordinate screen appears.NOTE• You can touch [SET] or [Initialize] when[Panel Color Scan] is set to off.• Touch [Initialize] to reset the settings to thedefault settings.3 Touch the desired color.