16 ENGLISHUsing Other ApplicationsKENWOOD Remote applicationYou can control the KENWOOD car receiver using KENWOOD Remoteapplication from iPhone/iPod touch (via Bluetooth or via USB input terminal)or Android device (via Bluetooth).• For more information, visit .Preparation:Install the latest version of KENWOOD Remote application on your devicebefore connecting.Start using KENWOOD Remote application1 Start up the KENWOOD Remote application on your device.2 Connect your device.• For Android device:Pair the Android device with this unit via Bluetooth. (Page 18)• For iPhone/iPod touch:Connect iPhone/iPod touch to the USB input terminal. (Page 11)(or)Pair the iPhone/iPod touch with this unit via Bluetooth. (Page 18)(Make sure the USB input terminal is not connected to any device.)3 Select the device to use from the [FUNCTION] menu.See the following “Settings to use KENWOOD Remote application”.By default, [ANDROID] is selected. To use iPhone/iPod touch, select [YES] for[IOS].• “R.APP” indicator lights up when KENWOOD Remote application isconnected.Settings to use KENWOOD Remote application1 Press the volume knob to enter [FUNCTION].2 Turn the volume knob to select an item (see the following table), thenpress the knob.3 Repeat step 2 until the desired item is selected or activated.4 Press and hold to exit.To return to the previous setting item, press .Default: [XX][REMOTE APP][SELECT] Selects the device ([IOS] or [ANDROID]) to use the application.[IOS] [YES]: Selects iPhone/iPod touch to use the application via Bluetooth orconnected via USB input terminal. ; [NO]: Cancels.If [IOS] is selected, select iPod BT source (or iPod USB source if your iPhone/iPod touch is connected via USB input terminal) to activate the application.• The connectivity of the application will be interrupted or disconnected if:– You change from iPod BT source to any playback source connected viathe USB input terminal.– You change from iPod USB source to iPod BT source.[ANDROID] [YES]: Selects Android device to use the application via Bluetooth. ;[NO]: Cancels.[ANDROID LIST] Selects the Android device to use from the list.• Displayed only when [ANDROID] of [SELECT] is set to [YES].
