Kenwood KMM-BT506DAB Instruction Manual

Also see for KMM-BT506DAB: Quick start guide Instruction manual Instruction manual Quick start guide

ENGLISH 27Audio Settings2-way crossover setting items[SPEAKER SIZE][FRONT] [SIZE] [8CM]/[10CM]/[12CM]/[13CM]/[16CM]/[17CM]/[18CM]/[4×6]/[5×7]/[6×8]/[6×9]/[7×10][TWEETER] [SMALL]/[MIDDLE]/[LARGE]/[NONE](not connected)[REAR] [8CM]/[10CM]/[12CM]/[13CM]/[16CM]/[17CM]/[18CM]/[4×6]/[5×7]/[6×8]/[6×9]/[7×10]/[NONE] (not connected)[SUBWOOFER] [16CM]/[20CM]/[25CM]/[30CM]/[38CM OVER]/[NONE](not connected)[X ' OVER][TWEETER] [FRQ] [1KHZ]/[1.6KHZ]/[2.5KHZ]/[4KHZ]/[5KHZ]/[6.3KHZ]/[8KHZ]/[10KHZ]/[12.5KHZ][GAIN LEFT] [–8] to [0][GAIN RIGHT] [–8] to [0][FRONT HPF] [F-HPF FRQ] [30HZ]/[40HZ]/[50HZ]/[60HZ]/[70HZ]/[80HZ]/[90HZ]/[100HZ]/[120HZ]/[150HZ]/[180HZ]/[220HZ]/[250HZ]/[THROUGH][F-HPF SLOPE] [–6DB]/[–12DB]/[–18DB]/[–24DB][F-HPF GAIN] [–8] to [0][REAR HPF] [R-HPF FRQ]Configure the settings for the rear speakers similarly tothe front speakers.[R-HPF SLOPE][R-HPF GAIN][SUBWOOFER LPF] [SW LPF FRQ] [30HZ]/[40HZ]/[50HZ]/[60HZ]/[70HZ]/[80HZ]/[90HZ]/[100HZ]/[120HZ]/[150HZ]/[180HZ]/[220HZ]/[250HZ]/[THROUGH][SW LPF SLOPE] [–6DB]/[–12DB]/[–18DB]/[–24DB][SW LPF PHASE] [REVERSE] (180°)/[NORMAL] (0°)[SW LPF GAIN] [–8] to [0]• [SUBWOOFER] of [SPEAKER SIZE] and [SUBWOOFER LPF] of [X’OVER] isselectable only when [SWITCH PREOUT] is set to [SUB-W] (page 6) and[SUBWOOFER SET] is set to [ON]. (Page 25)3-way crossover setting items[SPEAKER SIZE][TWEETER] [SMALL]/[MIDDLE]/[LARGE][MID RANGE] [8CM]/[10CM]/[12CM]/[13CM]/[16CM]/[17CM]/[18CM]/[4×6]/[5×7]/[6×8]/[6×9][WOOFER] [16CM]/[20CM]/[25CM]/[30CM]/[38CM OVER]/[NONE](not connected)[X ' OVER][TWEETER] [HPF FRQ] [1KHZ]/[1.6KHZ]/[2.5KHZ]/[4KHZ]/[5KHZ]/[6.3KHZ]/[8KHZ]/[10KHZ]/[12.5KHZ][SLOPE] [–6DB]/[–12DB][PHASE] [REVERSE] (180°)/[NORMAL] (0°)[GAIN] [–8] to [0]