Kenwood KMM-BT506DAB Instruction Manual

Also see for KMM-BT506DAB: Quick start guide Instruction manual Instruction manual Quick start guide

ENGLISH 29Audio SettingsWhen 3-way crossover is selected:[TWEETER LEFT]/[TWEETER RIGHT]/[MID LEFT]/[MID RIGHT]/[WOOFER]– You can only select [WOOFER] if a setting other than [NONE] is selected for[WOOFER] of [SPEAKER SIZE]. (Page 27)• [R-SP LOCATION] of [CAR SETTINGS] is selectable only if:– 2-way crossover is selected. (Page 7)– A setting other than [NONE] is selected for [REAR] of [SPEAKER SIZE].(Page 27)Determining the delay time automaticallyIf you specify the distance from the currently setlistening position to every speaker, the delay time willbe automatically calculated.1 Set [POSITION] and determine the listeningposition as the reference point (the reference pointfor [FRONT ALL] will be the center between theright and left in the front seats).2 Measure the distances from the reference point tothe speakers.3 Calculate the distance between the furthest speaker(subwoofer on the illustration) and other speakers.4 Sets the [DISTANCE] calculated in step 3 forindividual speakers.5 Adjusts [GAIN] for individual speakers.Example: When [FRONT ALL] is selected as thelistening position.Display SettingsZone identification for color settings and brightness settingsSet the dimmerPress and hold DISP to turn on or off the dimmer.• Once you press and hold this button, [DIMMER] setting (page 30) will beoverwritten.Change the display settings1 Press the volume knob to enter [FUNCTION].2 Turn the volume knob to select an item (page 30), then press theknob.3 Repeat step 2 until the desired item is selected/activated or follow theinstructions stated on the selected item.4 Press and hold to exit.To return to the previous setting item, press .