Kenwood KMM-BT506DAB Instruction Manual

Also see for KMM-BT506DAB: Quick start guide Instruction manual Instruction manual Quick start guide

18 ENGLISHPair and connect a Bluetooth device for the first time1 Press BSRC to turn on the unit.2 Search and select the name of your receiver (“KMM-BT506DAB”/“KMR-M506DAB”) on the Bluetooth device.“PAIRING” “PASS XXXXXX” “Device name” “PRESS” “VOLUMEKNOB” appears on the display.• For some Bluetooth devices, you may need to enter the PersonalIdentification Number (PIN) code immediately after searching.3 Press the volume knob to start pairing.“PAIRING OK” appears when pairing is completed.Once pairing is completed, Bluetooth connection is establishedautomatically.• “BT1” and/or “BT2” indicator on the faceplate lights up.• “ ” indicator lights up to show the strength of the battery and signal ofthe connected device.• This unit supports Secure Simple Pairing (SSP).• Up to five devices can be registered (paired) in total.• Once the pairing is completed, the Bluetooth device will remain registeredin the unit even if you reset the unit. To delete the paired device, see[DEVICE DELETE] on page 21.• A maximum of two Bluetooth phones and one Bluetooth audio device canbe connected at any time. To connect or disconnect the registered device,see [PHONE SELECT] or [AUDIO SELECT] in [BT MODE]. (Page 21)However, while in BT AUDIO source, you can connect to five Bluetoothaudio devices and switch between these five devices. (Page 22)• Some Bluetooth devices may not automatically connect to the unit afterpairing. Connect the device to the unit manually.• Refer to the instruction manual of the Bluetooth device for moreinformation.Auto PairingWhen you connect iPhone/iPod touch to the USB input terminal, pairingrequest (via Bluetooth) is automatically activated if [AUTO PAIRING] is set to[ON]. (Page 21)Press the volume knob to pair once you have confirmed the device name.Bluetooth — Mobile phoneReceive a callWhen there is an incoming call:• [ZONE 2] illuminates in green color and flashes.• The unit answers the call automatically if [AUTO ANSWER] is set to a selectedtime. (Page 19)During a call:• [ZONE 1] illuminates according to the settings made for [DISPLAY](page 30) and [ZONE 2] illuminates in green color.• If you turn off the unit or detach the faceplate, Bluetooth is disconnected.Bluetooth®