Kenwood KMM-BT506DAB Instruction Manual

Also see for KMM-BT506DAB: Quick start guide Instruction manual Instruction manual Quick start guide

ENGLISH 35Installation/ConnectionPart list for installation(F) Film antenna (×1) (G) Amplifier unit (cable withbooster, 3.5 m) (×1)(H) Cable clamper(×3)(I) Cleaner (×1)Determine the antenna installation position• The direction of the film antenna (F) changes depending on whether the film antenna (F) isinstalled on the right side or left side.• Be sure to check the installation location of film antenna (F) before installing. Film antennacannot be re-pasted.• Separate from other antennas by at least 100 mm.• Do not paste the amplifier unit (G) on the ceramic line (black part) around the front glass.Because there is not enough adhesion.Installing the antenna on the left side Installing the antenna on the right sideCeramic line (black part)Earth sheet*Earth sheet** Paste the earth sheet of the amplifier unit (G) on the metal part of the front pillar.CAUTIONWhen installing the antenna cable inside the front pillar with the air bag installed• The front pillar cover is secured with a special clipwhich may need to be replaced when it is removed.Contact your vehicle dealer for details on removingthe front pillar cover and availability of replacementparts.Front pillarClip• Install the amplifier unit (G) above the air bag so thatit does not obstruct the operation of the air bag.Air bagInstallation overviewThe antenna should be installedon the passenger side for safety.