22 ENGLISH[INITIALIZE] [YES]: Initializes all the Bluetooth settings (including stored pairing,phonebook, and etc.). ; [NO]: Cancels.Bluetooth test modeYou can check the connectivity of the supported profile between theBluetooth device and the unit.• Make sure there is no Bluetooth device paired.1 Press and hold .“PLEASE PAIR YOUR PHONE PIN 0000” appears on the display.2 Search and select the name of your receiver (“KMM-BT506DAB”/“KMR-M506DAB”) on the Bluetooth device.3 Operate the Bluetooth device to confirm pairing.“TESTING” flashes on the display.The connectivity result (OK or NG) appears after the test.PAIRING: Pairing statusHF CNT: Hands-Free Profile (HFP) compatibilityAUD CNT: Advanced Audio Distribution Profile (A2DP) compatibilityPB DL: Phonebook Access profile (PBAP) compatibilityTo cancel test mode, press and hold BSRC to turn off the unit.Bluetooth®Bluetooth — AudioWhile in BT AUDIO source, you can connect to five Bluetooth audio devicesand switch between these five devices.Listen to the audio player via Bluetooth1 Press BSRC repeatedly to select BT AUDIO.2 Operate the audio player via Bluetooth to start playback.To On the faceplatePlay back/pause Press 6 IW.Select group or folder Press 2 / 1 .Reverse skip/Forward skip Press S / T.Reverse/Fast-forward Press and hold S / T.Repeat play Press 4 repeatedly.[ALL REPEAT], [FILE REPEAT], [GROUP REPEAT]*,[REPEAT OFF]Random play Press and hold 3 to select [ALL RANDOM]or [GROUP RANDOM]*.• Press 3 to select [RANDOM OFF].