Kenwood KMM-BT506DAB Instruction Manual

Also see for KMM-BT506DAB: Quick start guide Instruction manual Instruction manual Quick start guide

ENGLISH 25Audio Settings1 Press the volume knob to enter [FUNCTION].2 Turn the volume knob to select an item (see the following table), thenpress the knob.3 Repeat step 2 until the desired item is selected or activated.4 Press and hold to exit.To return to the previous setting item, press .Default: [XX][AUDIO CONTROL][SUB-W LEVEL] [LEVEL –50] to [LEVEL +10] ([LEVEL 0]): Adjusts the subwoofer outputlevel.[EASY EQ] Adjusts your own sound settings.• The settings are stored to [USER] in [PRESET EQ].• The settings made may affect the current settings of [MANUAL EQ].[SW]: [LEVEL –50] to [LEVEL +10] (Default: [LEVEL 0][BASS]: [LEVEL –9] to [LEVEL +9] [LEVEL 0][MID]: [LEVEL –9] to [LEVEL +9] [LEVEL 0][TRE]: [LEVEL –9] to [LEVEL +9] [LEVEL 0])[MANUAL EQ] Adjusts your own sound settings for each source.• The settings are stored to [USER] in [PRESET EQ].• The settings made may affect the current settings of [EASY EQ].[62.5HZ] [LEVEL] [LEVEL –9] to [LEVEL +9] ([LEVEL 0]): Adjuststhe level to memorize for each source.(Before making an adjustment, select the sourceyou want to adjust.)[BASS EXTEND] [ON]: Turns on the extended bass. ; [OFF]: Cancels.[100HZ]/[160HZ]/[250HZ]/[400HZ]/[630HZ]/[1KHZ]/[1.6KHZ]/[2.5KHZ]/[4KHZ]/[6.3KHZ]/[10KHZ]/[16KHZ][LEVEL –9] to [LEVEL +9] ([LEVEL 0]): Adjusts the level to memorizefor each source.(Before making an adjustment, select the source you want to adjust.)[Q FACTOR] [1.35]/[1.50]/[2.00]: Adjusts the quality factor.[PRESET EQ] [NATURAL]/[ROCK]/[POPS]/[EASY]/[TOP40]/[JAZZ]/[POWERFUL]/[USER]: Selects a preset equalizer suitable to the music genre.• (For only)When the display demonstration is activated ([ON] is selectedinitially, page 30), [ROCK] is automatically selected as the[PRESET EQ].– If you set [DEMO MODE] to [OFF] (page 30), [NATURAL] isselected as the default setting for [PRESET EQ].(Select [USER] to use the settings made in [EASY EQ] or[MANUAL EQ].)[BASS BOOST] [LV1] to [LV5]: Selects your preferred bass boost level. ; [OFF]: Cancels.[LOUDNESS] [LV1]/[LV2]: Selects your preferred low or high frequencies boost toproduce a well-balanced sound at low volume. ; [OFF]: Cancels.[SUBWOOFER SET] [ON]: Turns on the subwoofer output. ; [OFF]: Cancels.[FADER] (Not applicable if 3-way crossover is selected.)[R15] to [F15] ([0]): Adjusts the front and rear speaker output balance.