Kenwood KRF-X7775D User Manual

Also see for KRF-X7775D: User guide Connection and setup guide Service manual

Contents

47Multiple ZonesChapter Four: Setting Up Multiple ZonesConnecting the External Infrared Receivers and IR Repeaters (for U.K. and U.S. military), continuedYour new audio-video receiver supports two-way externalinfrared (IR) remote transceiver control. The two-wayexternal infrared (IR) remote transceiverenables you to usethe Receiver’s PowerTouch to operate the receiver if itr is:• in a stereo closet/cabinet• behind glass doors• in another zone• in any situation where the device to be controlled isnot visibleFor more information about using external IR receivers inanother zone, see “Chapter Four: Setting Up MultipleZones” on page␣ 48 of the Users’ Guide.To Connect IR Receivers:1. Connect the IR receiver’s output cable to the Receiver’sIR RECEIVER IN jack. This jack supports a 12V 20mAsignal.2. (For some IR receiver)Connect an AC adaptor to the IR receiver. Do not plugthe adaptor into the wall until all connections aremade.Make sure that the input/output terminals and electricalspecifications of the IR receiver match those of this unit.(see Chapter Five: Warning and Specifications)