8Using ReceiverChapter Two: Controlling the ReceiverRemote Control unit provided with the receiver is a bi-directional Re-mote Control unit, which enables remote control while checking the in-formation shown on the LCD display. The operations of connected de-vices can also be controlled from Remote Control unit.Before first time using the receiver or after having changed or added theconnected devices, please be sure to read the separate booklet entitled“Connection and Setup Guide”.The present manual describes the operation procedures in normal use.This chapter is composed of the following sections.How Do I Adjust the Sound? page␣ 9How Do I Adjust the Surround Modes? page␣ 17Selecting the Inputs page␣ 35How Do I Operate Devices? page␣ 36How Do I Adjust the LCD Display? page␣ 50Executing Several Operations at Once (Macro function) page␣ 52For operation of other identified devices or with an external IR receiver,aim the Remote Control unit towards the respective unit and use it as aninfrared remote control.Do not block the remote control IR transmitter on the Receiver or thetransceiver part of the Remote Control unit. A momentary error is pos-sible when the signal is interrupted even momentarily during transmis-sion and reception (for example by a person passing through the beam).In such a case, the most recent information will be displayed when CON-FIRM/SHIFT button on the Remote Control unit is pressed. Sometime itmay be necessary to reenter the interrupted command again.
