Kenwood KRF-X7775D User Manual

Also see for KRF-X7775D: User guide Connection and setup guide Service manual

Contents

50SpecificationsChapter Five : SpecificationsDigital Audio SectionSampling Frequency ............. 32 kHz, 44.1 kHz, 48 kHz, 96 kHzInput Level / Impedance / WavelengthOptical ........................ -15 dBm ~ -21 dBm, 660 nm +30 nmCoaxial ............................................................ 0.5 Vp-p / 75 ΩOutput Level / Impedance / WavelengthOptical ........................ -15 dBm ~ -21 dBm, 660 nm +30 nmVideo SectionVideo Inputs / OutputsVideo (composite) ............................................. 1 Vp-p / 75 ΩS Video ( luminance signal) .............................. 1 Vp-p / 75 Ω(chrominance signal) .................. 0.286 Vp-p / 75 ΩComponent (luminance signal) ....................... 1 Vp-p / 75 Ω(Cb/Cr-signal) ............................ ±0.350 Vp-p / 75 ΩFM Tuner SectionTuning Frequency Range ........................... 87.5 MHz ~ 108 MHzUsable Sensitivity (Mono).................... 1.3 μV (75 Ω) / 13.2 dBf (75 kHz dev., sinad 30 dB)50dB Quieting SensitivityStereo .............................................. 25.1 μV (75 Ω) / 39.2 dBfTotal Harmonic Distortion (1 kHz)Mono ................................................... 0.3 % (71.2 dBf input)Stereo ................................................... 0.5 % (71.2 dBf input)Signal to Noise Ratio (1 kHz, 75 kHz DEV.)Mono ................................................... 75 dB (71.2 dBf input)Stereo .................................................... 70 dB (71.2 dBf input)Stereo Separation (1 kHz) ................................................. 40 dBSelectivity (+400 kHz) ....................................................... 50 dBFrequency Response ................ 30 Hz ~ 15 kHz, +0.5 dB, -3.0 dBAM Tuner SectionTuning Frequency Range9kHz step ............................................... 531 kHz ~ 1,602 kHz10kHz step ............................................. 530 kHz ~ 1,610 kHzUsable Sensitivity (30 % mod., S/N 20 dB)........................................................................... 16 μV / (500 μV/m)Signal to Noise Ratio (30 % mod. 1 mV input) ............... 50 dBGeneralPower consumption .......................................................... 500 WAC outletSwitched (except for Australia) .............. 2 (total 90 W max.)Switched (for Australia) .......................... 1 (total 90 W max.)Dimensions .................................................................. W : 480mmH : 191mmD : 416mmWeight (Net) ..................................................................... 16.8 kgKenwood follows a policy of continuous advancements indevelopment. For this reason, specifications may be changedwithout notice.Full performance may not be exhibited in extremely coldlocations (below 0 deg. C).SHAPE OF PLUG TO BE CONNECTED:IR IN/OUT SPECIFICATION:GeneralPower consumption .......................................................... 500 WAC outletSwitched ................................................... 2 (total 90 W max.)Dimensions .................................................................. W : 440mmH : 191mmD : 416mmWeight (Net) ..................................................................... 16.8 kgIR Receiver InTo Tip Signal SignalTo Ring GroundTo Sleeve +12V GroundIR Out LCDRemoteTerminalIR Receiver In and IR OutLCD RemoteDVD ControlStereo mini plug Mono mini plugSleeve SleeveRingTip TipIR Receiver In TerminalMaximum Output Current ............................................ 20 mAOperating Voltage .............................................................. 12 VOutput Impedance .......................................................... 470 ΩIR Out LCD Remote TerminalMaximum Output Current ............................................ 20 mAOperating Voltage ................................................................ 5 VOutput Impedance .......................................................... 470 Ω

/ 146

Related manuals for Kenwood KRF-X7775D