35Using ReceiverHow Do I Adjust the Surround Modes?1 Tuner (frequency display)2 CD13 MD/TAPE14 CD-R5 VIDEO16 VIDEO27 VIDEO38 DVD9 AV AUX0 PHONO¤ INPUT SELECTOR ‹TV buttonTV1 TV12 TV23 CABLEThe TV buttoncannot select theinput.It can be used toremote control TV1,TV2 or CABLE if ,devices areidentified at theseinputs.Video deviceMOVIE1 VIDEO12 VIDEO23 VIDEO3( 4 VIDEO4)5 DVD6 AV AUXIf any of the aboveinputs is notidentified, the nextdevice name will bedisplayed.Audio deviceMUSIC1 CD12 MD/TAPE13 Tuner4 CD-R5 PHONOIf any of the aboveinputs is notidentified, the nextdevice name will bedisplayed.Selecting the InputsTo select an input on the receiver:Press one of the INPUT SELECTOR (¤/‹) buttons. Each press changesthe input in the following order.Although VIDEO4 is displayed in the initial status, the receiver cannot beswitched to select VIDEO4. The VIDEO4 display will not appear afterRemote Control unit has been set up.To select an input on Remote Control unit:The TV-monitored device, video device and audio device can be selectedusing separate buttons.To return to the previously dis-played input, press the otherbutton.
