46Using ReceiverHow Do I Operate Devices?Storing RDS Station Automatically (for U.K. Only)The following operation should be performed on the receiver.1. Select the Tuner input (see page 27).2. Select the FM band.3. Press and hold the MEMORY button for more than 2 seconds.The receiver locates and stores any FM stations broadcasting an RDS sig-nal. This process can take a few minutes to complete; please be patient.While the receiver is searching, the tuner indicator on the receiver’s frontpanel blinks.RDS stations are stored in the order they are found, up to 40 stations. Ifthe search finds fewer than 40 stations, the receiver may automaticallystore other FM stations in the open storage buttons.If you are repeating the RDS search, any existing preset stations (whetherautomatically or manually stored) will be replaced by the results of thenew search.Presetting radio stationsThe following operation should be performed on the receiver.1. Select the Tuner input (see page 36).2. Tune into a desired station (page 44).3. Press the MEMORY button.4. Press the P.CALL (%/fi) button to display the desired preset memorybank number.5. Press the MEMORY button to preset the station under that number.6. To preset other stations, repeat steps 2 to 5 for each.
