Kenwood NXR-1700 Function Reference

Also see for NXR-1700: Instruction manual Instruction manual Instruction manual Service manual Instruction manual

7 DMR DIGITAL COMMUNICATIONS / 7.8 Limiting the IDs for Repeat Transmission (User List (GID)/ User List(UID))119FUNC (E)/ Ver 2.00Configuring the UIDs Permitted for Repeat Transmission (UID List)UID List is the list in which the UIDs permitted for repeat transmission on a digital channel are configured.The repeater repeats when receiving a call by the UID which is configured in UID List and for which “On” is configuredin Valid. Because subscriber units using unauthorized UIDs are not repeated, the repeater cannot communicate withthese subscriber units. In this case, the receiving subscriber unit is in a silent receiving mode because the repeatercontinues to transmit an idle signal to allow the call to be transmitted in a vacant slot.A maximum of 1000 UIDs can be configured in the UID List by using KPG-D7 or Web Tool.Figure 7-2 UID ListConfiguration using KPG-D7・ Configuring UID List ( Edit > User List > UID List)Configuration using Web Tool・ Configuring UID List ( Edit > User List > UID List > UID List)Configuring the GIDs Permitted for Repeat Transmission All at Once (GID Range)GID Range List is the list in which the multiple GIDs permitted for repeat transmission on a digital channel areconfigured all at once as a GID Range list.The repeater repeats when receiving a call by the GID which is configured in GID Range List and for which "On" isconfigured in Valid. Because subscriber units using unauthorized GIDs are not repeated, the repeater cannotcommunicate with these subscriber units. In this case, the receiving subscriber unit is in a silent receiving modebecause the repeater continues to transmit an idle signal to allow the call to be transmitted in a vacant slot.A maximum of 64 GID Range lists can be configured in GID Range List by using KPG-D7 or Web Tool.