Kenwood NXR-1700 Function Reference

Also see for NXR-1700: Instruction manual Instruction manual Instruction manual Service manual Instruction manual

20 MULTI LOADER / 20.4 Operation (from Startup to Firmware Conversion, Transfer, and Transfer Completion)229FUNC (E)/ Ver 2.00Status RequestTable 20-10 Status Request StatusRepeater Status DescriptionStatus00 Transferring: Transferring the firmwareStatus01 Updating: Overwrite script is being executed (firmware is written to the Standby area).Status02 Standby (Wait Reboot): Overwrite script is complete (wait for rebooting).Status03 Rebooting: RebootingStatus04 Activated: Startup is complete with the new firmware that has been transferred.Error01 When access to the repeater failsError02 When the firmware is written a repeater other than the corresponding repeaterError03 When a Port Open error occursError04 When the writing of an unsupported firmware to the repeater is performedError05 When an SFTP sequence authentication error occursError06 When in Force Firmware Programming ModeTable 20-11 Version InformationVersion Information DescriptionOperation_Firm_Ver The firmware version in operation is displayed.Stored_Firm_Ver The firmware version on standby is displayed.Reactivation Method The type of Reactivation selected when Transfer is executed is displayed.Usage: If the firmware switch trigger is lost, Reactivation can be actively executedfrom the Multi Loader by referring to the type of Reactivation. For Specified Time, theconfigured startup time is written at the same time.Hot Standby Active, Standby, or Failsoft is displayed.