Kenwood TK-860G Service Manual

Also see for TK-860G series: Instruction manual Instruction manual Service manual supplement Service manual Service manual

Contents

19TK-860G/862GREALIGNMENTSelf programmingmodeFunction settingmode[MON] key function[D/A]/[ ][A]/[MON] key function[D/A]/[ ] key function[ ]/[ ] key function[ ]/[A] key function[SCN] key function[FOOT] key function[D/A]/[ ][D/A]/[ ][D/A]/[ ][D/A]/[ ][D/A]/[ ][CH ] key function[D/A]/[ ][CH ] key function[D/A]/[ ][VOL ] key function[D/A]/[ ][VOL ] key function[D/A]/[ ]Power on tone yes/no[D/A]/[ ]Control tone yes/no[D/A]/[ ]Warning tone yes/no[D/A]/[ ]Minimum volume[D/A]/[ ]Off hook decode[D/A]/[ ]Off hook horn alert[D/A]/[ ][D/A]/[ ]Time out timerTOT pre-alert time[D/A]/[ ]TOT rekey time[D/A]/[ ]TOT reset time[D/A]/[ ]Clear to transpond[D/A]/[ ]Signalling[D/A]/[ ][D/A]/[ ][ ][ ][ ][ ][ ][ ][ ][ ][ ][ ][ ][ ][ ][ ][ ][ ][ ][ ][ ][ ][ ][ ][ ][ ][ ]Look back time APrioritySquelch level[D/A]/[ ]Look back time BRevert channelDropout delay timeDwell timeOff hook scanDigit time[D/A]/[ ][D/A]/[ ][D/A]/[ ][D/A]/[ ][D/A]/[ ][D/A]/[ ][D/A]/[ ]Inter digit time[D/A]/[ ]First digit time[D/A]/[ ]First digit delay[D/A]/[ ]Rise time with QT[D/A]/[ ]Dial ID[D/A]/[ ]No. of DTMF key[D/A]/[ ]DTMF hold time[D/A]/[ ]Store & Send[D/A]/[ ]D key assignment[D/A]/[ ]DTMF signalling[D/A]/[ ][D/A]/[ ]Inter mediate codeGroup code[D/A]/[ ]Auto reset time[D/A]/[ ]Call alert/Transpond[D/A]/[ ]Panel test/Panel tuning mode[D/A]/[ ][ ][ ][ ][ ][ ][ ][ ][ ][ ][ ][ ][ ][ ][ ][ ][ ][ ][ ][ ][ ][ ][ ][ ][ ]No. Function Choices Display RemarksDTMF32 Digit time 50~200ms/10ms DIGT__50 Default : 50ms33 Inter digit 50~1000ms/50ms IDT___50 Default : 50mstime34 First digit 50~200ms/10ms FDT___50 Default : 50mstime35 First digit 50~1000ms/50ms RIST_100 Default : 100msdelay36 Rise time 50~1000ms/50ms RTWQ_100 Default : 100mswith QT37 Dial ID Enable DID__ENADisable DID__DIS ←Default38 No. of 12 key NODK_12_ ←DefaultDTMF key 16 key NODK_16_39 DTMF ON DHT__ON_ ←Defaulthold time OFF DHT__OFF40 Store and Enable SAS__ENAsend Disable SAS__DIS ←Default41 D key D code DKA_D_CD ←Defaultassignment 1~16s/1s DKA_16__42 DTMF Code SQ DTMS_CSQ ←Defaultsignalling SWL CALL DTMF_SEL TK-860G only43 Inter 0~9, A~D, IMC__#__ Default : # (Can bemediate *, # set only when DTMFcode signalling=SEL CALL)44 Group A~D, *, # GPCD_OFF Default : OFFcode45 Auto OFF ART__OFFreset time 1~15s/1s ART__10_ Default : 10s46 Call alert OFF CA/T_OFF ←Default/transpond Call alert CA/T_C/ATranspond CA/T_T/A(Call alert)Transpond CA/T_T/I(ID code)Transpond CA/T_T/T(Transpond code)Others47 Panel Enable PTM__ENA ←Defaulttest/ Not used for TK-862Gpanel Disable PTM__DIStuningmode10-1. Flow Chart11. Memory Reset Mode (TK-860G only)You can clear all settings you made in self programmingmode, or you can return to the original display.• Press [SCN] while "SELF" is displayed will change the dis-play to "CANCEL".• Press [CH / ] to change the display between "CAN-CEL" and "READY".• When "READY" is displayed, pressing [SCN] will set alldata to default, and "CLEAR" will appear on the display.Press [SCN] again to display "SELF".• When "CANCEL" is displayed, pressing [SCN] will cancelthe reset, and "SELF" will be displayed.