![Kenwood TK-860G Service Manual Manual pdf 6 page image](https://manuals-archive2.s3.amazonaws.com/5245483/e0bc197880fe7ec9c273abb72daf84966f.jpg)
6TK-860G/862G1-5. Rear panelAntennaconnectorExternalspeaker jackPower inputconnector1-6. Programmable Auxiliary FunctionsThe following keys can be programmed with the func-tions listed below.TK-860G : / (left side), / (right side), MON, A, D/A,, , and SCN.TK-862G : / (left side), / (right side), MON, , , andA.• AUX• Channel Down• Channel Up• Display Character (TK-860G only)• Emergency * 1• Group Down (TK-860G only)• Group Up (TK-860G only)• Home Channel• Horn Alert• Key Lock• Monitor A (Monitor Unmute-Momentary)• Monitor B (Monitor Unmute-Toggle)• Monitor C (Carrier Squelch-Momentary)• Monitor D (Carrier Squelch-Toggle)• None (No function)• Operator Selectable Tone * 2 (TK-860G only)• Public Address• Redial• Scan (TK-860G only)• Scan Del/Add (TK-860G only)• Selectable QT *3 (TK-860G only)• Talk-Around• Volume Up• Volume Down• 2-Tone Encode Select *4*1 : This function can be used only with a foot switch.*2 : This function is available for K market models only.*3 : This function is available for M market models only.*4 : The code for the TK-862G transceiver is not selectable.You can transmit only one 2-Tone code, which is pre-programmed in the transceiver.2. Operation FeaturesThe TK-860G/862G is a UHF FM radio designed to oper-ate in conventional format. The programmable features aresummarized.3. Transceiver Controls and Indicators3-1. Front Panel ControlsAll the keys on the front panel are momentary-type pushbuttons. The functions of these keys are explained below.• POWER keyTransceiver POWER key. When the power is switchedoff, all the parameters are stored in memory. When thepower is switched on again, the transceiver returns to theprevious conditions.• CHANNEL UP/DOWN key (Programmable)• / key (Programmable) : TK-860G only• SCAN key (Programmable) : TK-860G only• MONITOR key (Programmable)• A, D/A key (Programmable) : TK-860G only• , , A key (Programmable) : TK-862G only• VOLUME UP/DOWN key (Programmable)• BUSY/TX LEDThe BUSY indicator (Green LED) shows that the channelis in use. The TX indicator (Red LED) shows that you aretransmitting.3-2. Programmable KeysThe FPU (KPG-56D) enables programmable keys to se-lect the following functions.AUX, Channel down, Channel up, Display character *1 ,Emergency (Only foot key ; M type only), Group down *1 ,Group up *1 , Home channel, Horn alert, Key lock, Monitor A,Monitor B, Monitor C, Monitor D, Operator selectable tone(K type only), Public address, Redial, Scan *1 , Scan del/add*1 , Talk around, Volume down, Volume up and None.These functions the FPU programs to the functionkeysand described in the following sections.*1 : TK-860G only.• AUXIf this key is pressed, "AUX" icon lights on the display andAUX port which is inside of the transceiver turns to the highlevel. If pressed again, the "AUX" icon goes off and the AUXports turns to the lower level.• Channel up/downWhen the key is pressed each time, the channel numberto be selected is incremented/decremented and repeats ifheld for one second or longer.OPERATING FEATURES