Kenwood TK-860G Service Manual

Also see for TK-860G series: Instruction manual Instruction manual Service manual supplement Service manual Service manual

Contents

5TK-860G/862G1. Controls and Functions1-1. TK-860G Front PanelIO (Power) switchPress to switch the transceiver ON (or OFF).LED indicatorLights red while transmitting. Lights green while receiv-ing. Flashes orange while receiving a Code Squelch orSelective Call code, or a 2-Tone code that matches theone set up in your transceiver./ keysThese are PF (Programmable Function) keys. Press eachkey to activate its auxiliary function. The default settingsare Volume Up and Volume Down.DisplaySee right./ keysThese are PF (Programmable Function) keys. Press eachkey to activate its auxiliary function. The default settingsare Channel Up and Channel Down.Microphone jackInsert the microphone plug into this connector.MON, A, D/A, , , and SCN keys (TK-860G)MON, , , and A keys (TK-862G)These are PF (Programmable Function) keys. Press eachkey to activate its auxiliary function.PTT (Push-to-Talk) switchPress this switch, then speak into the microphone to calla station.1 2 3 4 57681 2 3 4 5761-2. TK-862G Front Panel1-3. Microphone123456781-4. Display TK-860GIndicator DescriptionAppears while using SmarTrunk.Appears when the selected channelin busy.Appears when QT, DQT, DTMF, or2-Tone decoding is deactivated (bypressing the Monitor key).Appears when you receive a CodeSquelch, Selective Call, 2-Tone code.Also appears when you transmitusing Code Squelch or Selective Call.Appears while scanning.Appears when the AUX port isactivated.Appears when the selected channelis included in the scanning sequence.Displays the selected channelnumber (or name), DTMF digits(when entering digits, confirmingdigits, or making a call), and mes-sages received via Selective Call. TK-862GIndicator DescriptionAppears when QT, DQT, DTMF, or2-Tone decoding is deactivated (bypressing the Monitor key).Appears when the AUX port isactivated.Displays the selected channelnumber.OPERATING FEATURES