Kenwood X-W320 Instruction Manual

Also see for X-W320: Service manual Instruction manual Service manual

X-W320 (En)1 1Preparation for playback (recording)POWER- ON – OFFBefore playback (recording)Set the POWER switch to ON.: Keys and control used in the operations described on this page.Load a cassette tape in deck A or B.Determine the playback (recording) condition.Select the tape transport direction.322 Press the 7 key.2 37Normal position TYPEHigh position TYPE2 Insert a tape and close the cassette holder.Deck B:Playback/recordingavailable.BAPlayback (recording) preparation12 371 Press the 2 key or 3 key.1 Select the playback (recording) mode.REV.MODETo play (record) tape side A.÷ Be sure to remove tape slack before insertion.÷ The type of tape, that is, the Normal or High position is selectedautomatically.÷ This unit cannot record sound on a Metal tape.÷ Be sure to close the cassette holder securely by pushing it.÷ Feed the tape section which cannot be playedor recorded onto in the forward direction.÷ Select the Dolby NR mode according to the tape recording status.Deck A:Playbackonly.To play (record) tapeside B.The 2 and 3 indicators show the direction the tape is transportedduring recording or playback. The direction used when the tape islast stopped is held in memory even after this unit has been turnedOFF, and the tape transport starts in the indicated direction whenthe unit is started automatically by a timer, etc. To change the tapetransport direction, press the play key for the opposite direction andimmediately press the 7 key.Tape transport direction indicatorsA BB CDOLBY NRSTANDBYCOUNTERDUBB. NOR. HIGH(SP) CCRS O.T.E.R20 3 3 6 (dB)61015 0L0 0 0 0Deck B direction indicators.Deck A direction indicators.Each press switches the indication.1 “[” :Double-side playback (recording) which stops tape stopsafter having played (or recorded) both sides.2 “”” :Playback is endless, but recording stops after havingrecorded both sides.3 ““” :One-way playback (recording) which stops tape afterhaving played (or recorded) a single side.Each press switches the indication.1 DOLBY NR “OFF” (extinguished): Dolby NR is not used.2 DOLBY NR “B”: Noise reduction of the ordinary type.3 DOLBY NR “C”: Noise reduction with higher performance.2 Select the Dolby NR mode.DOLBY NR01 Press the 0 button.