Kenwood X-W320 Instruction Manual

Also see for X-W320: Service manual Instruction manual Service manual

X-W320 (En)6Information that you should know on cassette deck and tapeUnpackingUnpack the unit carefully and make sure that all accessories are put aside so they will not be lost. Examine the unit for any possibility of shipping damage.If your unit is damaged or fails to operate, notify your dealer immediately. If your unit was shipped to you directly, notify the shipping company withoutdelay. Only the consignee (the person or company receiving the unit) can file a claim against the carrier for shipping damage.We recommend that you retain the original carton and packing materials for use should you transport or ship the unit in the future.Keep this manual handy for future reference.Handling the cassette tapeTo store cassette tapesDo not store the tapes in a place which is subject to directsunlight, or near equipment that generates heat. Keep thecassette tapes away from any magnetic field.Notes on cassette tapeSafety tab (accidental erasure prevention tab)After an important recording has been finished, break the safetytab, to prevent the recorded contents from being erased orrecorded on accidentally.For B sideTo re-recordWhen there is slack in the tapeIn such a case, insert a pencil into the reel hole and wind the reelhub to remove the slack.NSNotesNotesFor A sideApply tape only to the positionwhere the tab has been removed.1. Longer tape than 110 minutes cassette tapeSince longer tape than 110 minutes cassette tape is verythin, the tape could adhere to the pinch roller or be easily cut.It is recommended that these tapes not be used with thisunit to prevent possible damage.2. Endless tapesDo not use an endless tape, as this could damage the mechanismof the unit.