Kenwood X-W320 Instruction Manual

Also see for X-W320: Service manual Instruction manual Service manual

X-W320 (En)2 21“Synchro recording” can be started from the CD player.Adjust the recording level.Press the 6 keyof the CD player.Press the 6 keyof the CD player.1 Play a CD. 2 Set the record-pause mode. 3 Adjust the recording level. 4 Put the CD player in pausemode.23 Start playing the CD.“Adjust the recording level.”^÷ While pressing the 8 key,press the ¶ key.8¶Press the 4 or ¢ key of the CD player,orpress the numeric key of the desiredtrack number.Press the 6 key of the CD player.To pause : Press the 6 key of the CD player.To restart recording : Press the 6 key of the CD player.To stop : Press the 7 key of the CD player.Preparation 1 Make “Playback (recording) preparation”.!2 (Load a disc in the CD player.)÷ If the 7 key of the cassette deck is pressed, the cassette deck entersthe stop mode but the CD player does not stop.: Keys and control used in the operations described on this page.Synchro playback/recordingCD synchro recording (Deck B only)Select the track to begin recording with.÷ Synchro recording is not possible when tracks of more than one CD areprogrammed using a Carrousel type CD player.÷ Recording starts at this moment.÷ When the CD player has completed playback, the cassette deck stopsrecording and enters the stop mode.