Kenwood X-W320 Instruction Manual

Also see for X-W320: Service manual Instruction manual Service manual

X-W320 (En)1 3Listening to cassette tapesLoad cassette tapes in both decks.1÷ Be sure to remove tape slack before insertion.This function plays back the tapes in both decks A and Bcontinuously and repeatedly.3Determine the playback condition.22 Select the Dolby NR mode.Relay playback02 Insert cassette tapes and close the cas-sette holders of decks A and B.Press the 7 key of the deck that is playing.2 372 37REV.MODEDOLBY NRStart playback.1 Select the playback mode.1 Open the cassette holders of decks A andB.A BEach press switches the indication.1 “[” : Relay playback of two sides of tapes in decks A and B isrepeated.2 “”” : Relay playback is not available with this setting.3 ““” : Relay playback of only one side of tapes in decks A andB is repeated.Each press switches the indication.1 DOLBY NR “OFF” (extinguished): Dolby NR is not used.2 DOLBY NR “B”: Noise reduction of the ordinary type.3 DOLBY NR “C”: Noise reduction with higher performance.÷ Select the Dolby NR mode according to the tape recording status.÷ Be sure to close the cassette holder securely by pushing it.To Stop relay playback÷ The playback starts with the deck the play key of which is pressed.