X-W320 (En)8AC110-120V~AC220-240V~RECINPLAYOUTLINERLTAPE 1/ MOTAPE 2(MONITOR)CDIN INAUXREC PLAY REC PLAYLRSYSTEMCONTROLSYSTEMCONTROLMake connections as shown below. When connecting therelated system components, refer also to the instructionmanuals of the related components.Caution: Do not plug in the power lead until all connectionsare completed.1. Connect all cords firmly. If connections are loose, there could be loss of sound or noise produced.2. When plugging and unplugging connection cords, be sure to first remove the power cord from the AC outlet. Plugging/unpluggingconnection cords without removal of the power cord can cause malfunctions or damage to the unit.Malfunction of microcomputerIf operation is not possible or erroneous display appears eventhough all connections have been made properly, reset themicrocomputer referring to “In case of difficulty”. ¤NotesNotesExcept for U.S.A., CanadaCaution regarding placementTo maintain proper ventilation, be sure to leave a space around the unit (from the largest outer dimensions including projections) equal to, or greaterthan, shown below.Left and right panels: 10 cm, rear panel: 10 cm*CD playerAudio cordsSystem control cord*AV CONTROL CENTER or ReceiverSystem connectionsTo wall AC outlet*The connected component modelis variable depending on areas.