X-W320 (En)1 2Normal playbackListening to cassette tapesPreparation Make “Playback (recording) preparation”.!Zero-stop operationTo play side B. To play side A.2 37÷ The 8 indicator lights.8¶2 371 ¡2 37Fast winding in the |direction1 ¡2 37To stop playbackTo pause playback÷ Do not press the 0 button until the tape has stopped completely.1 Stop playback.Usage of counterBefore starting recording (playback), press the RESET A orRESET B key to reset the counter to “0000”, and write down thecounter reading when the recording (playback) should be stopped inthe middle of the tape, etc.; this will make it easy to locate the sameposition when you want to continue recording (playback) next time.It is also possible to use the Zero-stop function to return to theposition where recording (playback) was started.Display example.ACOUNTERRL0 0 0 020 3 3 6 (dB)61015 0RESETA B÷ Tape is wound until counter reading near “0000” where it stops.÷ Press the 7 key to stop fast tape winding.1 ¡2 Press the 1 key or ¡ key.1: Fast tape winding in the |direction.¡: Fast tape winding in the \direction.2 37Start playbackFast forwarding or rewinding tapePress simultaneously.Press simultaneously.Fast winding in the \directionDeck A counter.÷ Tapes are played in the directions indicated by their respectiveindicators on the display.Press the 2 key or 3 key.