Setting Up a Clock Signal Setting Up Generic and Advanced SignalsKeysight 81133A/81134A Pulse Generator User’s Guide, April 2015 33Channel 2 Settings To set the channel parameters for channel 2:1 Switch to channel 2 by pressing the Ch2 softkey .2 Select the pattern mode Square.3 Set the Freq. Divider to 2.4 In the Levels panel:– Switch Ampl to High and set High to 1.0 V.– Set Low to 0 V.5 Enable the Channel 2 normal Output either:By pressing the respective softkey in the user interface.– OR –By pressing the normal Out softkey for channel 2 next to theOutput port.Normal OutChannel 2
