Setting Up Generic and Advanced Signals Setting Up a Repetitive Burst Signal54 Keysight 81133A/81134A Pulse Generator User’s Guide, April 2015Setting Up a Repetitive BurstSignalTask Set up a signal with 4 repeated bursts.Each burst consists of a 32-bit pattern signal with NRZ dataoutput format at 100 MHz to check a digital circuit with LVPECLlogic.The data pattern is:11100000000000000000000000000000Using the Graphical User InterfaceInstrument Settings To set the instrument parameters:1 Disable the outputs.2 In the instrument panel, choose the RBurst mode.3 Enter 4 for the number of null data packets.4 Define that the number of zeros that follows the repeated burstsis as large as the burst length.5 Set the frequency to 100 MHz.
