Setting Up a Data Pattern Setting Up Generic and Advanced SignalsKeysight 81133A/81134A Pulse Generator User’s Guide, April 2015 45The Data page now looks as follows:Reconnect the DUT Enable the outputs:Generated Signals Use the pulse generator’s TRIGGER OUT to trigger the scope onthe data pattern.To set up the trigger output:1 On the Aux page, in the Trigger Output panel:– Select the trigger mode Data.One trigger pulse occurs at the start of the repetitive datapattern.– Set the Ampl to 2 V.– Set the Offset to 1 V.NumericEdit ModeData patternlengthData pattern forchannel 2
