Setting Up Signals for a Stressed Eye Diagram Measurement Setting Up Generic and Advanced SignalsKeysight 81133A/81134A Pulse Generator User’s Guide, April 2015 65Setting Up the 33250A Waveform GeneratorProgram a 50 MHz sine wave with an amplitude of 2 Vpp:1 Press the Freq softkey.2 With the numeric keypad enter 50 as the frequency.3 Select the desired unit MHz by pressing the correspondingsoftkey.4 Press the Ampl softkey.5 Enter the value 2 with the numeric keypad.6 Press the Vpp softkey to select the desired unit.Viewing the Eye Diagram on the 86100 DCATo view the eye diagram on the scope:1 Ensure that the channel outputs and the trigger output at the81134A instrument are enabled.2 On the scope, switch to channel 1.3 Press the Source button near the trigger input until front panelis selected.4 Press the Eye/Mask Mode button.5 Press AutoScale.6 Switch on the 33250A output with the output key.The signal as displayed on a standard oscilloscope is depictedbelow.Delay modulated with sine wave
