Landmark NSQ412 Owner's Manual
                                                         | |
Contents
| 
NSQ412 Four-Line Caller ID Telephone Owner’s Manual 24Conference OperationThe Conference allows a station toestablish a 3-party conversation.Conference may occur between two sta-tions and a single CO Line or betweenone station and two CO Lines. To have aconference call, put the CO Line on hold.Make a second call either by intercom ora CO Line. Press the [CONF] key afterthe second person answers. All threepeople will be connected together. Endthe conference call by hanging up orpressing the [RELEASE] key (the phonegoes to idle).Do Not Disturb OperationThe telephone has Do Not Disturb(DND). A station with DND enabled willnot ring (it will display Caller ID info andthe LEDs will function). Press the [DND]key to activate. The DND LED will illumi-nate and the LCD will display:Press the [DND] key again to cancel thefunction. The LCD display will return tothe idle state.The Volume Key OperationPressing the Volume [ ] and [ ] keyswhile the telephone is on-hook will adjustthe ringer volume. There are 4-levels. Awarning beep will sound when the loud-ness is at minimum or maximum. Thedefault loudness is set to level-3. Theringer volume is the same for all lines (itcannot be set differently for any line).The ringer for each line can be disabledin programming mode.Pressing the Volume [ ] and [ ] keyswhile off-hook in handsfree mode will setthe handsfree volume. There are 8-lev-els. A warning beep will sound when theloudness is at minimum or maximum.The volume will remain at the user-adjusted setting after the phone goes on-hook. The default loudness is set tolevel-4. The handsfree volume is thesame for all lines (it cannot be set differ-ently for any line).Pressing the Volume [ ] and [ ] keyswhile off-hook with the handset will setthe receiver volume. There are 4-levels.A warning beep will sound when theloudness is at the minimum or maximum.The volume will remain at the user-adjusted setting after the phone goes on-hook. The default loudness is set tolevel-1.Pressing the Volume [ ] and [ ] keyswhile off-hook with the headset will setthe headset volume. There are 4-levels.A warning beep will sound when theloudness is at the minimum or maximum.The volume will remain at the user-adjusted setting after the phone goes on-hook. The default loudness is level-1.Battery Low WarningThe telephone will indicate when the bat-tery is low (or missing). The LCD will dis-play:1 2 / 2 6 1 2 : 0 8 PD N D 1 2C I D : 1 0 0 / 1 9 81 2 / 2 6 1 2 : 0 8 PE X T 1 2C I D : 1 0 0 / 1 9 8 B A T T |
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine