NSQ412 Four-Line Caller ID Telephone Owner’s Manual 35Press the [REMOVE] key to begin delet-ing the record. The LCD will display:Press the [REMOVE] key again within 3-seconds to confirm the deletion. TheLCD will display:After approximately 5-seconds, the LCDwill return to the CID Summary screen.Dialing a Caller ID RecordTo dial a telephone number from theCaller’s List, display the record to becalled. Press the Center of the [JOG]knob. The telephone will go off-hook onan available CO Line in the previousmode (handsfree or headset) and dialthe number.orPick up the handset. The telephone willgo off-hook on an available CO Line anddial the number.orTo select a desired CO Line and dial,while viewing the entry, press the desired[CO Line] key.In all cases for example, the LCD willdisplay:NOTE: Be sure to read the section AreaCode Programming to make sure theCID number is stored and dialed in thecorrect format (7-digit, 10 digit or 11-digitdialing). When the calling number doesnot originate from any of the pro-grammed area codes, the LCD will dial a1 + the entire number when the callingnumber is 10-digits or longer.Storing a Caller ID RecordTo save a record from the Caller’s Listinto the Directory or a Speed Dial loca-tion, display the record to be saved. Forexample, the LCD will display:Press the [RELEASE] key to quit theCaller’s List. Press the [DIRECTORY]key. The LCD will display:Press the [SAVE] key to start to enter thename. The LCD will display:Press the [CID LIST] to copy the CallerID name and number from the Caller Listto the display. For example, the LCD willdisplay:1 2 / 2 7 0 2 : 3 3 PC L # 1 7 4 L 2B O B J O N E SR E M O V E : r e m o v e ?0 3 / 2 5 0 3 : 4 2 PC L # 1 3 2 L 1S A L L Y P E T E R S5 5 5 6 7 6 7S A L L Y P E T E R S5 5 5 6 7 6 7S A V E : s a v e ?C L # 1 7 4R e m o v e d !1 2 3 4 5 6 70 0 : 0 1C I D : 1 0 0 / 1 9 8D I R E C T O R Y< > : s e l e c tP u b l i c / P r i v a t e( E n t e r n a m e )S A V E : s a v e ?