Landmark NSQ412 Owner's Manual
                                                         | |
Contents
| 
Press the [SAVE] key to store the min-utes setting. The unit will then enter theAM/PM mode. Rotate the [JOG] knob toselect the AM/PM. The LCD will display:orPress the [SAVE] key to store theAM/PM setting. The LCD will display:After approximately five seconds, the dis-play will return to the highest level of thecurrent setting.Programming the Station NumberEach station must have a different stationnumber. If two stations have the samenumber, one will continuously emit a ringtone after initializing. To program theExtension Number, enter the program-ming mode and turn the [JOG] knob untilthe display shows EXTENSION NO. TheLCD will display:Press the NAVIGATION [>] key to beginselecting the Extension Number. NOTE:The default extension number is 11.Rotate the [JOG] knob to select theextension number. The LCD will display:••Press the [SAVE] key to accept the set-ting. The LCD will display:After approximately five seconds, the dis-play will return to the highest level of thecurrent setting.Message Waiting IndicatorProgrammingThe MSGW Waiting indicators may bemanually turned on or off. To programthe MSGW indicators for CO Lines, enterthe programming mode and turn the[JOG] knob until the display showsMSGW ON/OFF. The LCD will display:M I N U T E S1 2 / 3 1 1 2 : 5 9 AT u r n D i a lS A V E : s a v e ?E X T E N S I O N N OT u r n D i a l> : e n t e rE X T E N S I O N N O= 2 2P r o g r a m m e d !M S G W O N / O F FT u r n D i a l> : e n t e rE X T E N S I O N N O= 1 1T u r n D i a lS A V E : s a v e ?E X T E N S I O N N O= 2 2T u r n D i a lS A V E : s a v e ?A M / P M1 2 / 3 1 1 2 : 5 9 AT u r n D i a lS A V E : s a v e ?A M / P M1 2 / 3 1 1 2 : 5 9 PT u r n D i a lS A V E : s a v e ?A M / P M1 2 / 3 1 1 2 : 5 9 PP r o g r a m m e d !NSQ412 Four-Line Caller ID Telephone Owner’s Manual 41 |
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine