Press the [REMOVE] key within 3-sec-onds to confirm the Rests All function.The LCD will display:CARE AND MAINTENANCEPlace your phone in a location where itscords will be out of the way and where itis not likely to be knocked to the floor.To clean, use a soft cloth, dampened inmild detergent. Never use abrasives orsolvents and never spray cleaners direct-ly onto the telephone.RADIO FREQUENCY INTERFER-ENCEWARNING! This equipment generates,uses and can radiate radio frequencyenergy and if not connected and operat-ed in accordance with the Owner’sManual, may cause interference to radiocommunications. It has been tested andfound to comply with the limits for aClass A computing device pursuant toSubpart J of Part 15 of the FCC Ruleswhich are designed to provide reason-able protection against such interferencewhen operated in a commercial environ-ment. Operation of this equipment in aresidential area is likely to cause interfer-ence in which case the user at his ownexpense will be required to take whatev-er measures may be required to correctthe interference.PROBLEMS YOU CAN SOLVESTATION IS RINGING CONTINUOUSLYMake sure the station number is dif-ferent than the other stations beingused.CANNOT DISPLAY THE CALLER IDRECORDSMake sure the station is on-hook andidle.ARE INTERCOM, LINE STATUS, AUTO-ANSWER, PRIVACY, OR AUTO-LINESELECTION INOPERABLE?1. Check if Lines 1 and 2 are cross-wired in the wall jack.2. See if you may have installed your 2-line adapter incorrectly.3. Be sure all NSQ412 stations in thesystem are connected to Line 1 anddisconnect all non-system telephonesfrom Line 1.4. Check the station programmablecodes.5. Be sure the length of cable betweenstations does not exceed 600 feet.6. Check that all phone lines are correct-ly connected to each station (everyLine 1 is connected to the appropriateCO line, every Line 2 is connected tothe appropriate CO line, and so on).7. Remove all RFI filters from the sys-tem wiring, you may also need tocontact your telephone company tohave any RFI filters removed from thecompany side of the connection.IS YOUR TELEPHONE INOPERABLE?1. Check all connections to be sure theyare securely in place.2. Reinitialize the telephone by momen-tarily unplugging the a. c. adapter.3. Make sure the a. c. adapter haspower at the wall outlet.NSQ412 Four-Line Caller ID Telephone Owner’s Manual 50R e s e t !