Makita DLS110 Instruction Manual
Also see for DLS110: Instruction manualInstruction manualInstruction manualInstruction manualInstruction manual
                                                                                                                                                                                                                                                    | |
21 ENGLISH\Fig.31 Switch trigger 2 Lock-off button 3 Hole for padlock 4 Lid (for wireless unit)(For DLS111 only)5 Switch (for laser line)(For DLS111, DLS112only)6 Battery indicator 7 Mode indicator 8 Check button9 Wireless activationbutton10 Wireless activation lamp 11 Hose (for dustextraction)12 Stopper pin (for carriageelevation)13 Guide fence (lowerfence)14 Guide fence (upperfence)15 Dust bag 16 '| ! bevel angle)17 Bevel angle scale 18 Releasing lever (for 48°bevel angle)19 Latch lever (for bevelangle)20 Pointer (for bevel angle)21 :Y| ! bevel angle)- - - - - -INSTALLATIONInstalling the gripScrew the threaded shaft of the grip into the turn base.\Fig.4: 1. Grip 2. Installing the dust extraction hoseConnect the dust extraction hose to the tool asillustrated.}= the ports of the tool.\Fig.5: 1. Dust extraction hose 2. Elbow 3. Sleeve4. PortBench mountingWhen the tool is shipped, the handle is locked in thelowered position by the stopper pin. While lowering thehandle slightly, pull the stopper pin and rotate it 90°.\Fig.6: 1. Locked position 2. Unlocked position3. Stopper pin stable surface using the bolt holes provided in the tool's \Fig.7: 1. BoltWARNING: Ensure that the tool will not moveon the supporting surface. Movement of the mitersaw on the supporting surface while cutting may FUNCTIONALDESCRIPTIONWARNING: Always be sure that the tool isswitched off and the battery cartridge is removedbefore adjusting or checking the functions onthe tool. Failure to switch off and remove the battery accidental start-up.Installing or removing batterycartridgeCAUTION: Always switch off the tool beforeinstalling or removing of the battery cartridge.CAUTION: Hold the tool and the battery car-@\4]( `\+#' |(& 4&*@/##4& Q\ \(+Qj4& ~/@@(\'cartridge. Failure to hold the tool and the battery and result in damage to the tool and battery cartridge \Fig.8: 1. Red indicator 2. Button 3. Battery cartridge while sliding the button on the front of the cartridge. battery cartridge with the groove in the housing and slipit into place. Insert it all the way until it locks in placewith a little click. If you can see the red indicator on theupper side of the button, it is not locked completely.CAUTION: Always install the battery cartridgefully until the red indicator cannot be seen. If not, you or someone around you.CAUTION: Do not install the battery cartridgeforcibly. If the cartridge does not slide in easily, it isnot being inserted correctly.NOTE: = cartridge. |
Related manuals for Makita DLS110
Makita DLS110 Instruction Manual
Makita DLS110 Instruction Manual
Makita DLS110 Instruction Manual
Makita DLS110 Instruction Manual
Makita DLS110 Instruction Manual
Makita DLS110 Instruction Manual
Makita DLS110 Instruction Manual
Makita DLS110 Instruction Manual
Makita DLS110 Instruction Manual
Makita DLS110 Instruction Manual
manualsdatabase
Your AI-powered manual search engine