Makita DLS110 Instruction Manual

Also see for DLS110: Instruction manual Instruction manual Instruction manual Instruction manual Instruction manual

Contents

29 ENGLISHIn the case of left bevel cut(a) (b) (c) (d)1 21. Inside corner 2. Outside cornerTable (A)– Moldingpositionin the`[\(Bevel angle Miter angle52/38°type45° type 52/38°type45° typeForinsidecorner(a) Left33.9°Left 30° Right31.6°Right35.3°(b) Left31.6°Left35.3°Foroutsidecorner(c)(d) Right31.6°Right35.3°Table (B)– Moldingposition in@( `[\(Moldingedge againstguide fenceFinishedpieceFor insidecorner(a) Ceilingcontact edgeshould beagainst guidefence.Finishedpiece will beon the Leftside of blade.(b) Wall contactedge shouldbe againstguide fence.For outsidecorner(c) Finishedpiece will beon the Rightside of blade.(d) Ceilingcontact edgeshould beagainst guidefence.Example:_ Y/+T| !" A TTG|# % T*|q_ =! "surface down on the turn base with its CEILINGZ]^%Z## saw. # made.In the case of right bevel cut(a) (b) (c) (d)1 21. Inside corner 2. Outside cornerTable (A)– Moldingpositionin the`[\(Bevel angle Miter angle52/38°type45° type 52/38°type45° typeForinsidecorner(a) Right33.9°Right30°Right31.6°Right35.3°(b) Left31.6°Left35.3°Foroutsidecorner(c)(d) Right31.6°Right35.3°Table (B)– Moldingposition in@( `[\(Moldingedge againstguide fenceFinishedpieceFor insidecorner(a) Wall contactedge shouldbe againstguide fence.Finishedpiece will beon the Rightside of blade.(b) Ceilingcontact edgeshould beagainst guidefence.For outsidecorner(c) Finishedpiece will beon the Leftside of blade.(d) Wall contactedge shouldbe againstguide fence.Example:_ Y/+T| !" A TTG|q_ % T*|q_ =! " >%Z]^%Z## saw. q_ made.

/ 244

Related manuals for Makita DLS110

Makita DLS110 Instruction Manual

This manual is suitable for:

DLS110 DLS111 DLS112

manualsdatabase

Your AI-powered manual search engine