Program 47: IntraMail47-13: IntraMail Dial Action TablesIntraMail for Aspire System Guide Chapter 3: Programming ◆ 2393- For example, to allow callers to go to mailboxes 1-16, for key 0 enter GOTO for the Action andXXX for the corresponding Number.■ To log into any valid Call Routing or Subscriber Mailbox, enter IXXX in the corresponding Numberoption.- For example, to allow callers to dial 1 plus any Call Routing or Announcement Mailbox number togo to, for key 1 enter GOTO for the Action and IXXX for the corresponding Number.Additional Information■ See Go To A Mailbox on page 87 for more.UND Action - Undefined Routing (0)(UND)Use this key action if you want a key to have no routing (no operation). When an Automated Attendant callerpresses an undefined key, they hear, “That is an invalid entry.” The caller can then dial another option.Number Option■ N/AAdditional Information■ See Undefined Routing on page 173 for more.47-13-01: Dial Action Table Numbers (Data)Digits(0-9, #, and *)Use Dial Action Table digits to route an Automated Attendant call to a specific location (such as an exten-sion). For example, to set up a TRF Action to route to extension 305, for digit 3 enter TRF for the Action and305 for the corresponding Number.■ See Dial Action Table on page 62 for more.Options■ 0-9, #, and * (8 digits max.)Default✔ See Dial Action Table Default Settings on page 236.Caller Dialed Digits(X) [Entered by pressing LK2]Use the X option to route an Automated Attendant call based on digits the caller dials. Each X entry representsone caller-dialed digit. For example, to set up a TRF Action to route to any caller dialed extension in the 301-399 range, for digit 3 enter TRF for the Action and XXX for the corresponding Number.■ See Dial Action Table on page 62 for more.Options■ X (Entered by pressing LK2)Default✔ See Dial Action Table Default Settings on page 236.Ignore Digits(I) [Entered by pressing LK3]Use the I option to represent any digit dialed by the Automated Attendant caller that IntraMail ignores for rout-ing. An example of this is REC action assigned to the * key in Dial Action Table 1 by default. The Action isREC2 and the Number is IXXX. This means that a caller can dial * + any mailbox number to leave a QuickMessage in that mailbox. IntraMail ignores the first digit dialed by the caller (*), and routes according to thenext 3 digits dialed.■ See Dial Action Table on page 62 for more.Options■ I (Entered by pressing LK3)
