Electra Elite IPK II Document Revision 4CConference, Voice Call/Privacy Release 2 - 259Conference, Voice Call/Privacy ReleaseDescriptionVoice Call Conference lets extension users in the same work area join in a trunk Conference. To initiatea Voice Call Conference, an extension user just presses the Meet-Me Conference key and tells theirco-workers to join the call. The system releases the privacy on the trunk, and other users can press thetrunk line key to join the call. Line keys assigned for the trunk blink indicating that privacy is released,and others can join the current call.Voice Call Conference does not use the telephone system features to announce the call. The personinitiating the Voice Call Conference announces it verbally. A tone, indicating others have joined theconference, can be provided.The CPUII provides 64 Conference circuits, to allow any number of internal or external parties to beconferenced together up to a limit of 32.Privacy Mode Toggle OptionThis option allows an extension user to quickly change an outside call from non-private mode to privatemode. If the outside call is on a line key, the user can press the line key to switch from non-private modeto private mode. For systems using the Privacy Mode Toggle option, trunks initially have the privacyreleased. The remainder of the call is private. If the call is on a Call Appearance (CAP) Key, the usercan press their Meet-Me Conference function key instead. Unlike pressing the line key, pressing theMeet-Me Conference key toggles back and forth between private and non-private mode for the call.Conditions Call Arrival (CAR) Keys and Virtual Extensions do not support Voice Call ConferenceProgrammable Function keys. Voice Call Conference requires a Meet-Me Conference function key and trunk line keys. This feature is not available on single line telephones. With Caller ID enabled, a call with Privacy Release shows the Caller ID until the call isanswered. To view it again, press the line key, though this sets the call to Private mode. Tokeep the call on Privacy Release, press the Help + Exit keys.Default SettingDisabled
