Electra Elite IPK II Document Revision 4CSecondary Incoming Extension 2 - 863Secondary Incoming ExtensionDescriptionSecondary Incoming Extensions (SIE) are incoming appearance keys of actual stations assigned in thesystem. SIE keys are assigned to programmable function keys and can appear on an individual station,or multiple stations. Incoming internal calls, ringing DIL/Tie/DID/CO Transfer calls, or call forwardedcalls can be picked up from an SIE.Conditions Calls cannot be originated from a Secondary Incoming Extension. Off-Hook ringing is provided with calls ringing into Secondary Incoming Extensions. Secondary Incoming Extensions are forwarded when the actual station is set for callforwarding. SIE keys can appear on an individual station, or multiple stations. A station can have more than one SIE key assigned. Up to 32 calls can be queued waiting on an SIE key. When a Secondary Incoming Extension call is received and answered while the user is onan outside line call, the first call can be automatically put on hold. If a trunk call rings a Secondary Incoming Extension, to answer the call, the station must beprogrammed with the direct trunk appearance key or an available CAP key and the SIEmust be programmed to allow the call to come off the SIE key and appear on the line orCAP key. The same SIE key cannot be programmed on multiple programmable function keys on thesame Multiline Terminal. An SIE key does not ring during an Intercom Voice call to the actual station. If multiple CAR/SIE/VE keys are ringing on a station at the same time, the CAR/SIE/VE keyon the lowest Line Key is answered first.Default SettingNone
