Electra Elite IPK II Document Revision 4CRingdown Extension, Internal/External 2 - 849Ringdown Extension, Internal/ExternalDescriptionWith a Ringdown Extension, a user can call another extension, outside number, or Speed Dialingnumber by just lifting the handset. The call automatically goes through – there is no need for the user todial digits or press additional keys. Ringdown Extensions are frequently used for lobby telephones,where the caller just lifts the handset to get the information desk or off-site Reservation Desk.After the Ringdown Extension user lifts the handset, ringdown occurs after a programmable interval.Depending on the setting of this interval, the extension user may be able to place other calls before theringdown goes through.Conditions Ringdown extension has no effect on an extension current (active) call. The Ringdown Extension user can lift the handset or press the Speaker key to initiateringdown. If the Ringdown/Hotline destination is a speed dial bin, the appropriate service code mustproceed the bin number. Ringdown Extension can use Speed Dial – System/Group/Station numbers (and followtheir trunk routing) as the destination number. Ringdown Extension follows Call Forwarding. For example, the ringdown destination canforward their calls. When the Ringdown Extension user lifts the handset, ringdownautomatically calls the extension to which calls are forwarded. If the Ringdown Extension user hears busy tone when they lift the handset, they canCamp-On to the destination, leave a Callback or activate Off-Hook Signaling. The ringdown destination user can activate Do Not Disturb. When the Ringdown Extensionuser lifts the handset, they hear DND. If enabled, the Ringdown Extension user canoverride the destination’s DND. If the destination extension has Handsfree Answerback enabled, the call voice announces.If the destination extension has Forced Intercom Ringing enabled, the call rings. A Call Arrival (CAR) Key or Virtual Extension can be a ringdown destination. This wouldallow a front door key to be programmed on every extension. Delayed Ringdown can occur by setting the Hotline Start Timer. However, Ringdown doesnot occur if the Hotline Start Timer is set longer than the Extension Dial Tone Timer.
