5-40 Installing the Operating System with Express SetupIMPORTANT: Reserve the partition to install the OS more than the minimallyrequired size. If you select "Use Existing Array" at "New/Existing RAIDConfiguration", the information included in the first partition(excluding maintenance partition) will all be formatted and deleted.The information included in the other partition will be retained.In the figure below, describes the partition which information willbe deleted when maintenance partition exists.First PartitionRetainedSecondPartitionDeletedThirdPartitionRetainedFourthPartitionRetained You can not re-install the system with the existing partition that isupgraded to Dynamic Disk remained. Do not select "UseExisting Array" at "New/Existing RAID Configuration". If "Create New Partition" at "New/Existing RAID Configuration"is selected, do not specify the value for the partition more than theactual area size. If you specify other than 4095MB for the "Installing Partition", itis necessary to convert to NTFS. If "Use Existing Array" at "New/Existing RAID Configuration" isselected but the partition other than the one to install Windows2000 does not exist (excluding maintenance partition), ExpressSetup will reserve the maximum area of the hard disk drive toinstall Windows 2000. You can not go to the next screen if the specification is incorrect.NOTES: If you click [Cancel] in [Basic Information] screen, the screen willgo back to select the OS. [Cancel] exists only in [BasicInformation] screen. If you click [OK] in [Role of Computer] screen, the setupautomatically selects default value for the later specification tocontinue the installation.
