Installing Windows Server 2003 E-19Installing SCSI Controller Driver (N8103-75)If you utilize SCSI controller driver (N8103-75), install it according to the following procedure:R2>If you utilize SCSI controller driver (N8103-75), update your system with NECEXPRESSBUILDER CD-ROM attached to your system.The SCSI controller driver will be installed automatically.1. Start [Device Manager] from [Start] menu → [Control Panel] → [Administrative Tools]→[Computer Management].2. Double-click the SCSI Controller driver which Device Manager lists as Other device.3. Click [Update Driver].4. When the "Update Device Driver Wizard" appears, select "Install from a list or specificlocation [Advanced]" and click [Next].5. Select "Don't search. I will choose the driver to install" and click [Next].6. Click [Have Disk..].7. Insert "Windows Server 2003 OEM-DISK for NEC EXPRESSBUILDER" into the floppydisk drive, enter "a:\" into "copy manufacturer's file from:" and click [OK].8. Specify the following driver and click [Next].[Adaptec SCSI Card 29320ALP -Ultra320 SCSI] (When N8103-75 board is installed.)The installation of the driver is completed.Restart the system according to the message appeared on the screen.Installing SCSI Controller Driver (N8103-56/-95/N8190-126)If you utilize SCSI controller driver (N8103-56/-95/N8190-126), update your system with NECEXPRESSBUILDER CD-ROM attached to your system.The SCSI controller driver will be installed automatically.
