Setting Up Your Server 3-5UNPACKING THE SYSTEMWhen you receive your system, inspect the shipping containers prior to unpacking. If the shippingboxes are damaged, note the damage, and if possible, photograph it for reference. After removingthe contents of the containers, keep the cartons and the packing materials. If the contents appeardamaged when you unpack the boxes, file a damage claim with the carrier immediately.INSTALLING THE SERVERThis subsection provides the instructions for the rack-mount server unit into a standard EIA 19-inchrack cabinet.Also this subsection describes the removal procedures for the rack-mount server unit from the 19-inch rack cabinet.WARNINGObserve the following instructions to use the server safely. Failure to followthese instructions may result in death or serious personal injury. See pages 1-3 to 1-8 for details. Do not use any rack which does not conform to the relevant standard. Disconnect the power cord(s) before installing or removing the server.CAUTIONObserve the following instructions to use the server safely. Failure to followthese instructions may cause a fire, personal injury, or property damage. Seepages 1-3 to 1-8 for details. Do not leave more than one device being pulled out from the rack. Do not lift the server only by a single person. Always install the server in the specified place. Do not install the server on the rack leaving the cover removed. Do not pinch your finger with mechanical components.
